› fitting doors and windows;
› thermal insulation of water, sewage and central heating systems;
› sealing and installation of window sills;
› thermal insulation of flat roofs and ceilings;
› filling gaps (up to 2 cm wide) in thermal insulation when insulating buildings.
› Wide temperature range (from -10°C to 30°C).
› Has excellent stability (no shrinkage)
› Cures by moisture in the air.
› Shows excellent thermal insulation and sound-proof parameters.
› Resistant to mould and fungi.
Substrate preparation:
Thoroughly clean and degrease the substrate. Remove hoarfrost in the winter season. Before application,
moisten the surface with water mist to ensure better adhesion.
Product preparation:
Before use, warm the can with foam to room temperature (optimally +20°C) by, for example, immersing the can
in warm water. Shake the can vigorously for 30 seconds to thoroughly mix the ingredients. Screw the can onto
the expanding foam gun.
Foam application:
Dispense product in the upside-down working position. Fill the gap to 60% of its depth, in layers of 4 cm per
layer. Moisten the surface between each layer to improve good adhesion and speed up curing. Fill vertical gaps
from bottom to top. Once fully cured use a knife to cut off any excess foam. When the foam has fully cured, it
should be protected from UV radiation by covering it with silicon masses, plasters, paints etc.
