A special active solvent for cleaning dirt and deposits from throttles and carburettors without disassembly.
Throttle Valve Cleaner
Removes dirt and deposits deposited in the carburettor and throttle without disassembly of the cleaned part. It can be used to clean channels, calibrated holes, and carburettor nozzles. The product is suitable for a wide range of engines (e.g., lawn mowers, motorcycles, vintage cars, etc.) - suitable for two- and four-stroke engines.
- Dissolves stubborn deposits in the intake system and throttle.
- Enables access to hard-to-reach areas thanks to a special spray nozzle.
- Cleans moving parts, preventing them from jamming and ensuring smooth operation.
- Improves the performance of the entire intake system.
- Reduces harmful exhaust emissions, improves engine start-up and operation.
- Restores engine efficiency.
Shake the can well before use. With the engine switched off, remove the air filter element and the air intake hose leading to the throttle body. Generously spray the parts to be cleaned and leave for 3–5 minutes. Wipe off excess product with a cloth (wipe). Before proceeding, remove any loosened deposits using a cloth (wipe). Start the engine and spray the carburetor throat or throttle body with the product for approximately 30 seconds, while simultaneously increasing engine speed to about 2,000 rpm to burn off the dissolved deposits. Switch off the engine for 15 minutes, then reinstall the air intake hose and air filter. In case of heavy contamination, repeat the application.
WARNING: Do not spray on painted or plastic surfaces. If necessary, protect the engine compartment. The product may cause streaking or discoloration of paint.
Logistics
| Capacity | 500 ml |
| Packaging type | can |
| Bulk packaging | box 12 pcs |
| Quantity on pallet | 1008 pcs |
