› The rust remover contains penetrating additives that, together with graphite, loosen rusty screws, valves,
machine parts, etc. It is particularly helpful when loosening exhaust manifold bolts, wheel suspension
bolts, and in any area where moisture and heat have caused the bolt or pin to seize.
Mobility is restored and creaking sounds are eliminated.
› Protects loose areas against corrosive influences and the formation of new rust.
› The presence of graphite ensures that lubricating properties are maintained over a long period of time, even
after drying and wear of other components.
› Penetrates quickly, displaces water and loosens rust;
› The addition of graphite reduces the coefficient of friction, especially under high loads, and reduces the risk
of damage in devices exposed to vibration, shock, and overheating;
› No seizing of screws, nuts and bolts when loosening or tightening;
› High resistance to sudden temperature changes.
› 360-degree valve – sprays and cleans at any angle;
› Free from silicone, resins and acids;
Colour dark grey
Smell characteristic
State of matter aerosol, liquid
Density 0,78 - 0,82 g/cm3
Solid lubricants graphite
pH value not applicable
Solubility:
a) in the water insoluble
b) in organic solvents soluble
Before use, read the product label. Shake well before use. Apply the product from a distance of approximately 20 cm to the surface or precisely between the mechanical components. Allow the product to penetrate the joints. Remove excess product with a cloth or brush. To remove dirt, repeat the procedure until a satisfactory result is achieved. CAUTION! Do not use the product on hot surfaces or components connected to a power source. Remember to unplug devices from the power supply when using the product and blow out closed systems with compressed air before reconnecting them to the power supply.
Capacity | 400 ml |
Packaging type | can |
Bulk packaging | box 15 szt. |
Quantity on pallet | 900 pcs. |