Drilling and tapping oil is a special, high-performance lubricating oil without aggressive additives that is particularly effective for threading, reaming, sawing, drilling, turning, scraping, punching, and milling.
DRILLING AND THREADING OIL
- Special oil for threading, reaming, sawing, drilling, turning, scraping, punching, and milling;
- Can be used on all types of steel, castings, stainless steel, copper, brass, aluminum and their alloys;
- Good adhesion to cutting edges;
- Prevents tools from seizing and breaking;
- Less wear thanks to longer tool life;
- Higher cutting speed, faster drilling;
- Better lubrication;
- Better temperature control;
- Excellent corrosion protection (no further treatment required);
- Increased precision;
- Free from silicone, chlorine, resins, acids, and paint and varnish softeners;
- Free from heavy metals
Colour transparent
Smell characteristic
State of matter aerosol, liquid
Density 0,86 ± 0,05 g/cm3
Flash-point min. 220°C
Base oil viscosity, dynamic at 20°C 110 – 230 mPas
DIRECTIONS FOR USE
Shake the aerosol can vigorously before use. Simply spray onto the tool.
ATTENTION
Copper and copper alloys must be washed off after processing.
STORAGE AND EXPIRY DATE
The product should be stored in a closed container, upright, in a dry, cool, and well-ventilated place, away from direct sunlight and other sources of heat and ignition. Storage temperature: +5°C to +35°C (room temperature recommended). Expiration date: 2 years from the date of production. The production date is located on the bottom of the packaging.
Logistics
| Capacity | 400 ml |
| Packaging type | can |
| Bulk packaging | box 15 szt. |
| Quantity on pallet | 900 pcs. |
