- filling large holes, empty air spaces;
- thermal insulation of water, sewage and central heating networks;
- sealing various types of joints and gaps to obtain thermal and acoustic insulation;
- thermal insulation of roofs and flat roofs;
- filling the space around ventilation ducts, improving the insulation of elements with complex shapes.
- High thermal and sound insulation;
- It hardens under the influence of moisture contained in the air;
- Twice the expansion compared to other foams;
- Resistant to fungi and mold.
- Colour Light yellow
- Working temperature from -5°C to +30°C
- Can temperature from +10°C to +30°C (optimally +20°C)
- Foam yield 30-45 l
- Skin formation time 8-12 min. (20°C, RH 50%)
- Cutting time 40±10% [min.]
- Full hardening time 24 h Increase in height (expansion degree) of the foam applied in the gap), % <200%
- Thermal resistance (upon hardening) from -50°C to +90°C
- Thermal conductivity λ 0,036 W/(m·K)
- Water absorbability after 24 hours in water when partially immersed ≤1 kg/m2
- Inflammability B3 (DIN 4102)
- Solubility in organic solvents acetone, before hardening
Substrate preparation:
Thoroughly clean and degrease the substrate. Before application, moisten the surface with water mist to ensure better adhesion.
Product preparation:
Before use, warm the can with foam to room temperature (optimally +20°C) by, for example, immersing the can in warm water. Shake the can vigorously for 30 seconds to thoroughly mix the ingredients. Screw the can onto the expanding foam gun.
Foam application:
Apply the foam in an upside-down working position. Fill vertical gaps from the bottom up. Remove excess foam after curing mechanically (e.g., with a knife). Once fully cured, protect the foam from UV radiation using silicone sealants, plaster, paint, or other protective materials. If application is interrupted for longer than 15 minutes, secure the application gun by leaving the can screwed on for the next use. After finishing work, clean the gun of any remaining foam with a suitable cleaning agent, e.g., polyurethane foam cleaner.
STORAGE AND EXPIRY DATE
Store in a dry, cool and well-ventilated place, in an upright position, in the original closed container. Keep away from heat, open flames and other ignition sources. Recommended storage temperature is from +5 °C to +30 °C (optimally +20 °C). Storing the product in conditions other than recommended may result in shortening its lifetime by up to 3 months. Do not store the product in the cabin of a car. Transport only in the trunk. Expiry date: 12 months. Store and use before the expiry date indicated on the bottom of the container.
