ADHESIVE AND LABEL REMOVER

• Precise and economical dosing thanks to the fine spray jet;
• Suitable for surfaces such as glass, metal, wood, PVC, foil, and all non-sensitive surfaces;
• Evaporates without leaving any traces, leaving a pleasant scent;
• Reaches even hard-to-reach places;
• Be careful when using on polystyrene, varnished wood, and other sensitive surfaces.

Test the product on an inconspicuous area first;

• No silicone

Colour transparent

Smell characteristic

State of matter aerosol, liquid

Density 0,79 ± 0,05 g/cm3

Solubility:

a) in the water insoluble

b) in organic solvents soluble

Apply directly to the adhesive residue, label, or sticker, leave for approximately 3-5 minutes, and then peel the label off the surface or wipe off the dissolved adhesive residue. Once all residue is removed, the surface is ready for new labels. In difficult cases, the application time can be extended to approximately 15 minutes. If adhesive residue remains after removing the label, spray onto a cloth and wipe off the residue.
 

ATTENTION
Before using on plastics or painted surfaces, it is essential to test their suitability (resistance test). The adhesive and label remover is not suitable for items made of polystyrene or polycarbonate. It has a strong cleaning and degreasing effect. When using in large quantities, wear appropriate protective gloves to avoid skin irritation. The work area must be well ventilated.
 

STORAGE AND EXPIRY DATE
The product should be stored in a closed container, upright, in a dry, cool, and well-ventilated place, away from direct sunlight and other sources of heat and ignition. Storage temperature: +5°C to +35°C (room temperature recommended). Expiration date: 2 years from the date of production. The production date is located on the bottom of the packaging.